St. Patrick’s Day in Savannah

Visiting Savannah for St. Patrick’s day? Below is a list of things to do and places you’ll want to check out. If this is your first time, you are definitely in for an eye opening experience!

St. Patrick’s Day Parade

With over 400,000 visitors in Savannah, the St. Patrick’s Day parade is ranked #3 largest in the US! There are several places you can sit and enjoy the parade, but you’ll want to arrive early in order to secure a decent spot. This year, the parade will be held on Tuesday, March 17th from 10:15am to 2pm.

For more information about the parade, click HERE.

St. Patrick’s Day Festival

This year, the festival will be held March 13th & 14th starting at 10am till midnight. If you plan on participating in the festivities and day drinking all over downtown, be sure to get a wristband. They are $10 each day and can be purchased at several booth throughout downtown, River Street and City Market. If you don’t, you could face a fine of more than $50.

There will also be live entertainment and activities as well as, artists, photo booths and a food court.

For more information, click HERE.

Greening of the fountain at Forsyth Park

It is tradition in Savannah to dye all of the fountains green, but they start with Forsyth first. Every year the city dyes the fountain green and hosts a ceremony. This year, the ceremony will take place on March 6th from 12 to 1pm at Forsyth park.

For more information, click HERE.

Irish Restaurants and Bars

Molly MacPheron’s Pub & Grill – check out their menu and drinks HERE.

McDonoughs of Savannah – check out their menu and drinks HERE.

O’Connells Irish Pub – for more information, click HERE.

Whether this is your first time or your fifth time celebrating St. Patrick’s Day in Savannah, you are sure to have an amazing experience that you will hopefully remember!

DIY Floating Desk Under $100


With the growth of our new business, we have started to become pretty busy. The orders keep coming in (which is an AWESOME thing) but we were working harder, not smarter and that needed to change immediately. One big issue we were having was that we weren’t organized. We had the Cricut machine in my office, heat press in the garage and random supplies all over the house. The office/craft room did not have enough storage nor desk space and it was only getting worse as the days went on.

We decided to go with floating desks to maximize our storage space. Jake found some different ways to build floating desks, but we decided to do it this way, because 1.) it was the easiest & 2.) duh, it was the cheapest! LOL

We made a trip to Lowe’s to purchase the following supplies:

  • Six 2x4x10 ft wood pieces found here ($4.77 each-$28.62 total)
  • Four 19.5 shelf brackets found here ($11.98-$47.92)
  • Gorilla Glue wood glue ($3.98)
  • Wood stain in Early American ($7.98)
  • Wood screws found here ($2.58)

Total cost = $91.08

The first step we did was trimmed the six 10 ft pieces to 9ft and then sanded down the edges. Then, we applied Gorilla Glue wood glue to each piece and secured using clamps and let dry completely before applying the wood stain. The wood stain color we chose was “Early American” and applied one coat. Once that was dry, we applied a couple of coats of the polyurethane and let dry overnight.

Now comes the FUN part — installation! After marking the walls where the studs were, we then measured and marked 30 inches tall on each stud. This was how tall the floating desk was going to be. Then we secured the brackets to each stud and then set the six wood pieces and secured those to the brackets using wood screws.

Marking where the studs are.

And here is the finished product! What do you think?! I am absolutely in love with our new room and can’t wait to organize, decorate and grow our business even bigger!

DIY Ceiling Witch Hat


We couldn’t wait until October to decorate our first house for Halloween! We both were/are excited and spent the weekend shopping for indoor and outdoor Halloween decorations. One of the items we purchased were these witch hats that we found at the Dollar Tree.

Dollar Tree Witch Hat.

I saw some ideas on Pinterest of people hanging them from the ceiling and I thought it was such a neat idea and had to try it out! & It looked extremely easy to do.

Items needed for project.

SUPPLIES NEEDED:

First, you’ll want to take your thread and measure how low you want the hats hanging from the ceiling. Next, you’ll apply the thread to the witch hats either using Glue Dots, Super Glue or Command Strips. I used glue dots and attached them to the string and them secured to the witch hat. Once all were completed, I applied them to the ceiling again using glue dots.

Hanging witch hats.

Depending on your ceilings (paint, dust, etc.), you may want to use a command strip and place the thread in between the two to hold. Most of our hats are holding up well, except one — it keeps falling, but I think it’s due to where it’s located and being pushed down by the air vent.

I wanted to place some in our living room, but we use the fan too much and they would fall.

What do you think?! Have you done something similar? Please share below!

Grow your own Pineapples!


Ever wonder how to grow your own pineapple at home? It’s super easy! Next time you go to the grocery store, be sure to pick up a pineapple and grow one at home for yourself!

How to grow pineapples at home

STEP ONE: Cut off the top of the pineapple.

STEP TWO: Place pineapple top in a cup of water, ensuring that roots are covered. Remember to change out the water every couple of days.

STEP THREE: Once the roots start to show, you’ll want to plant in soil. We chose to plant ours in a pot since winter will be here in a few months and we weren’t sure how cold it was going to get here in Savannah, GA.

We chose this self watering planter to help us with watering. If you want one similar, check out these: CLICK HERE.

Jake poured soil into the planter.
Dug a little hole for the pineapple to go in and covered around with soil.
Once the pineapple was in, we added extra soil on top.

After a few months, a hard stalk will appear in the center and you’ll want to keep this moist so the pineapple can develop properly. Once the pineapple is fully ripe, you may then pick it. Some plants vary and can sprout within a year, while others typically take two years.

I’ll update this post as our pineapple grows, so be sure to keep checking back! 🙂

Our helpers were nearby, as always.

What are some of the foods you have grown from leftover scraps? Please share below!

DIY Fabric Box on a budget.


I had some extra scraps from a chair I recovered that I really liked and wanted to reuse again, but wasn’t sure exactly what to do with it. I took a walk around the house to see if anything would come to mind when a light bulb came on in the garage. I saw some cardboard boxes waiting to be recycled and knew that I could easily cover them and use them for storage in our bedroom.

SUPPLIES NEEDED

  • Cardboard box
  • Scissors
  • Hot glue gun and glue sticks
  • Fabric
  • Measuring tape or ruler

WHAT TO DO

Lay fabric on flat surface with cardboard box on top.

Lay out a large piece of fabric on a flat surface and place the cardboard box on top. Next, measure and mark 1 inches on all sides of the box. Start cutting the fabric along the one inch mark towards the box. You will repeat this step 8 times.

Cut all four corners.

The remaining fabric will resemble a cross. Starting with one end of the box and fabric, apply hot glue and fold over until secured in place. Hold for a few seconds until the glue is dry. Repeat this step for all corners.

Fold the sides in to create a clean seam.

Once all 4 sides are complete, you’ll have a fabric covered box ready for use! I ended up putting a fake plant in ours to give our bedroom corner some color. What do you think?!

Have you done a project similar to mine? Please comment and share below!

DIY Rope Handles.


I was at Hobby Lobby the other day when I came across the handles/pulls/knobs aisle. I was looking for some ideas on how to update our living room entertainment center for fairly cheap and fell in love with these.

They weren’t on sale this week either.

I started to pick up four of them when I thought to myself “I can make these at home.” I knew I had the rope and glue gun at home, so I returned the pulls and then headed to the next aisle, duh.

Supplies needed for this project: glue gun, screwdriver and rope.
Our entertainment stand before the update.

When I found the time later that day, I grabbed my glue gun and my ball of rope and started on “project pull.”

Close up. Plain and boring (and dirty).

I unscrewed the pulls and cleaned them off while the glue gun was warming up. Once everything was dry, I applied glue to the pull and pressed the rope down to hold it in place.

Once the glue was dry, I wrapped the rope around the pull ensuring that it’s tight, not loose.

Make sure it’s snug like the first two, not the third.
Before and after.

I repeated the steps for all four pulls before screwing back into the entertainment stand.

Next project will be to frost these windows with some sort of design to hide the clutter.

I feel like it really ties everything together and brightens up the space!

Have you done any quick, easy projects around your home using the supplies you already have? If so, what are they?! Comment them below!